Tue. Dec 5th, 2023

PC cooling isn’t an optional technology; without it, your hardware will quickly deteriorate. If you plan to edit 4k video or push your processor and graphics card hard, liquid cooling is the best option for keeping them cool enough to operate at peak performance and stay safe from damage. Air cooling — relying on fans to blow hot air out of your case — isn’t as efficient and can actually cause components to overheat.

When you choose to use a liquid cooling system, you’ll need a series of coolant-filled tubes, a radiator and a pump. Many manufacturers offer self-contained units that plug directly into a motherboard or power supply and provide liquid cooling to just one chip. Kits allow you to assemble a complete custom cooling loop, but make sure the parts you purchase are compatible with your specific hardware.

The heat that’s produced by your CPU and GPU essentially comes from the metal surface of their integrated circuits (IHS). A layer of thermal paste connects the IHS to the baseplate of each component. Liquid coolant moves from the pump through the water block, absorbing the heat, then travels upward through one of the tubing to a radiator at the back of the computer case. The radiator exposes the liquid to air, which further helps cool it. The cooled liquid then returns to the water block, where the cycle begins again.

While you can buy premade coolants, distilled water with a biocide and corrosion inhibitor is a more cost-effective choice for liquid cooling. Be sure to use a clear coolant, as colored fluid can clog the tubing and reduce its effectiveness. Pc cooling

By Admin

Leave a Reply

Your email address will not be published. Required fields are marked *